TAILIGHTS

255-111

FLIGHT Tailight Unit

High quality, black anodized, CNC machined aluminum housing with special lines and sporty design. 2 lighting units each with 4 powerful SMDs ensure an excellent luminosity, smoke lens, E-marked
Taillight to be installed in upright position. An upside down installation is not approved. loosen the M3 hex screw to adjust the angle of the stem within 30 degrees.

Dimensions:
Width: 61 mm  |  Height: 14 mm  |  Depth: 32 mm

255-163

CONERO T1 Tailight Unit

Taillight with an extraordinary shape with 4 efficient SMDs and a smoked lens. Premium quality, black anodized housing. Elegant, stylish design with polished chamfers.

Dimensions:
Width: 32 mm  |  diameter: 15 mm
Depth with holder: 24,5 mm
Mounting screws: 1 x M4 x 10 mm

255-167

CONERO T2 Tailight Unit

Taillight with the remarkable shape comes with 4 efficient SMDs and a smoke lens. Premium quality housing made of black anodized, CNC milled aluminium. Elegant, stylish design with polished chamfers.

Dimensions:
Width: 45 mm  |  Height: 11 mm  |  Depth: 12 mm
Mounting screws: 2 x M4 x 10 mm, hole spacing: 52 mm (centre – centre)

255-032

STRIPE Tailight Unit

Taillight with Power-LED comes in a black universal housing made of aluminium with different lens, E-marked.

Dimensions:
Width: 53.5 mm  |  Height: 7 mm  |  Depth: 15 mm

255-033

STRIPE Tailight Unit

Taillight with Power-LED comes in a chrome universal housing made of aluminium with different lens, E-marked.

Dimensions:
Width: 53.5 mm  |  Height: 7 mm  |  Depth: 15 mm

255-015

MONO Tailight Unit

Taillight with one Power-LED comes in a chromed or black anodized aluminium housing with a clear lens and a round shape, E-marked.
Dimensions:
Diameter: 18 mm
Height: 8 mm
Mounting bolt M10 x 1.5 mm, length: 13 mm and nylon nut

255-016

MONO Tailight Unit

Taillight with one Power-LED comes in a chromed or black anodized aluminium housing with a clear lens and a round shape, E-marked.
Dimensions:
Diameter: 18 mm
Height: 8 mm
Mounting bolt M10 x 1.5 mm, length: 13 mm and nylon nut

INDICATORS

Thunderbike Under Perch LED Stripe Indicators

Easy to mount under the oem controls

stripe-1

LED AMBER STRIPE FRONT INDICATORS

Suits FXSB ’13-’14, Softail ’96-’14, Dyna ’96-’17, Sportster ’96-’03

Clean up the look of your Softail 96-14, Dyna 96-later & Sportster 96-03 with our small LED Indicators

  • Sold in pairs
  • Polished Aluminium
  • CNC machined aluminium case
  • E-approved
  • Easy to mount under the oem controls
  • Smoke Lens

Super Bright E-Marked

stripe-2

LED AMBER STRIPE FRONT INDICATORS

Suits FXSB ’13-’14, Softail ’96-’14, Dyna ’96-’17, Sportster ’96-’03

Clean up the look of your Softail 96-14, Dyna 96-later & Sportster 96-03 with our small LED Indicators

  • Sold in pairs
  • Black Aluminium
  • CNC machined aluminium case
  • E-approved
  • Easy to mount under the oem controls
  • Smoke Lens

LED AMBER STRIPE FRONT INDICATORS

Suits Softail 2015-later / Touring 09-16.

These Indicators are also suitable for the new Harley-Davidson Softail ’18-later models! Fits Harley-Davidson Softail ’15-later (excl. CVO) models and Touring ’09-’16 (not for hydraulic clutch) models.
We recommend a Load Equalizer for correct frequency

  • Sold in pairs
  • Polished Aluminium
  • CNC machined aluminium case
  • E-approved
  • Easy to mount under the oem controls
  • Smoke Lens

LED AMBER STRIPE FRONT INDICATORS

Suits Softail 2015-later / Touring 09-16.

These Indicators are also suitable for the new Harley-Davidson Softail ’18-later models! Fits Harley-Davidson Softail ’15-later (excl. CVO) models and Touring ’09-’16 (not for hydraulic clutch) models.
We recommend a Load Equalizer for correct frequency

  • Sold in pairs
  • Black Aluminium
  • CNC machined aluminium case
  • E-approved
  • Easy to mount under the oem controls
  • Smoke Lens

LED AMBER STRIPE FRONT INDICATORS

Suits Softail Slim S & Fat Boy S models 16-later, V-Rod and Touring 09-later.

Fits Harley-Davidson Softail Slim S models and Fat Boy S 16-later models, FXSE, V-Rod 02-17 models and Touring 09-later models (hydraulic clutch).
We recommend a Load Equalizer for correct frequency

  • Sold in pairs
  • Polished Aluminium
  • CNC machined aluminium case
  • E-approved
  • Easy to mount under the oem controls
  • Smoke Lens

LED AMBER STRIPE FRONT INDICATORS

Suits Softail Slim S & Fat Boy S models 16-later, V-Rod and Touring 09-later.

Fits Harley-Davidson Softail Slim S models and Fat Boy S 16-later models, FXSE, V-Rod 02-17 models and Touring 09-later models (hydraulic clutch).
We recommend a Load Equalizer for correct frequency

  • Sold in pairs
  • Black Aluminium
  • CNC machined aluminium case
  • E-approved
  • Easy to mount under the oem controls
  • Smoke Lens

LED AMBER STRIPE FRONT INDICATORS

Suits Sportster 04-13.

Fits Harley-Davidson Sportster 04-13 models
We recommend a Load Equalizer for correct frequency

  • Sold in pairs
  • Polished Aluminium
  • CNC machined aluminium case
  • E-approved
  • Easy to mount under the oem controls
  • Smoke Lens

LED AMBER STRIPE FRONT INDICATORS

Suits Sportster 04-13.

Fits Harley-Davidson Sportster 04-13 models
We recommend a Load Equalizer for correct frequency

  • Sold in pairs
  • Polished Aluminium
  • CNC machined aluminium case
  • E-approved
  • Easy to mount under the oem controls
  • Smoke Lens

LED AMBER STRIPE FRONT INDICATORS

Suits Sportster 14-later.

Fits Sportster 14-later

  • Sold in pairs
  • Polished Aluminium
  • CNC machined aluminium case
  • E-approved
  • Easy to mount under the oem controls
  • Smoke Lens

LED AMBER STRIPE FRONT INDICATORS

Suits Sportster 14-later.

Fits Sportster 14-later

  • Sold in pairs
  • Black Aluminium
  • CNC machined aluminium case
  • E-approved
  • Easy to mount under the oem controls
  • Smoke Lens

Highsider Indicators

203-220

line-diagram-4-measurements

STS 1 Sequence LED indicator

The STS 1 with black anodized aluminium indicator housing has a modern running light system. The LED technology with many single-cell sources makes it possible. The flash frequency run from inner to outer side and it creates a wiper effect. Current car models have the new flashing effect. The lens is tinted and fits seamlessly into the design.
Dimensions:
A Width: 68 mm
B Width with stem: 82 mm
C Height: 20 mm  |  D Depth: 23 mm
Threaded bolt: M8

203-221

line-diagram

STS 1 Sequence LED indicator

The STS 1 with black anodized aluminium indicator housing has a modern running light system. The LED technology with many single-cell sources makes it possible. The flash frequency run from inner to outer side and it creates a wiper effect. Current car models have the new flashing effect. The lens is tinted and fits seamlessly into the design.
Dimensions:
A Width: 68 mm
B Width with stem: 82 mm
C Height: 20 mm  |  D Depth: 23 mm
Threaded bolt: M8

254-260

line-diagram-4-measurements

ARC Front LED indicator with DRL

Daytime Running Light, aluminium housing, clear lens, sold as pairs, E-mark for front use.
Dimensions:
A: 65 mm  |  B: 22 mm  |  C: 20 mm
Threaded bolt: M 8 x 1.25

254-261

line-diagram

ARC Front LED indicator with DRL

Daytime Running Light, aluminium housing, clear lens, sold as pairs, E-mark for front use.
Dimensions:
A: 65 mm  |  B: 22 mm  |  C: 20 mm
Threaded bolt: M 8 x 1.25

254-026

line-diagram-4-measurements

SPARK LED indicator

This Indicator is characterized by its minimal design size. A nice upgrade for every motorcycle.
Black housing, smoke lens, rubber stem, E-marked for rear installation.
Dimensions:
A: 25 mm  |  B: 36 mm
C: 11 mm  |  D: 14,5 mm
Threaded bolt: M 8 x 1.25

254-026

line-diagram-4-measurements

SPARK Front LED indicator
with DRL

This Indicator is characterized by its minimal design size
Intergrated with Daytime Running Light, black housing, smoke lens, rubber stem, E-marked for rear installation.
Dimensions:
A: 25 mm  |  B: 36 mm
C: 11 mm  |  D: 14,5 mm
Threaded bolt: M 8 x 1.25

254-176

APOLLO LED indicator

Inside the filigree housings Modern light technology in extreme small dimension with 2 very intense SMD LED in the centre. COBs (Chip On Board) complete the light source at the external ring. A nice upgrade for every motorcycle.
Dimensions:
A Diameter: 22 mm  |  B Width: 39 mm
C Depth: 21.5 mm  |  Stem length: 16 mm
Threaded bolt: M8 x 1.25

254-176

APOLLO Front LED indicator with DRL

Inside the filigree housings Modern light technology in extreme small dimension with 2 very intense SMD LED in the centre. COBs (Chip On Board) complete the light source at the external ring. A nice upgrade for every motorcycle. Intergrated with Daytime Running Light, black housing, smoke lens, rubber stem, E-marked for rear installation.
Dimensions:
A Diameter: 22 mm  |  B Width: 39 mm
C Depth: 21.5 mm  |  Stem length: 16 mm
Threaded bolt: M8 x 1.25

254-177

APOLLO LED indicator

Inside the filigree housings Modern light technology in extreme small dimension with 2 very intense SMD LED in the centre. COBs (Chip On Board) complete the light source at the external ring. A nice upgrade for every motorcycle.
Dimensions:
A Diameter: 22 mm  |  B Width: 39 mm
C Depth: 21.5 mm  |  Stem length: 16 mm
Threaded bolt: M8 x 1.25

254-177

APOLLO Front LED indicator with DRL

Inside the filigree housings Modern light technology in extreme small dimension with 2 very intense SMD LED in the centre. COBs (Chip On Board) complete the light source at the external ring. A nice upgrade for every motorcycle. Intergrated with Daytime Running Light, black housing, smoke lens, rubber stem, E-marked for rear installation.
Dimensions:
A Diameter: 22 mm  |  B Width: 39 mm
C Depth: 21.5 mm  |  Stem length: 16 mm
Threaded bolt: M8 x 1.25

200-295

ATTO LED Indicator

The world’s smallest turn signal! Sensationally small, spectacularly bright!
Behind this extremely small and sensationally powerful Atto lies a light surface that fits four times on a $2 coin! Thanks to the miniature housing, your motorcycle can be designed as minimalistically and individually as never before.
Dimensions: length 14mm, max. Diameter 10mm, lens diameter 7.8mm
With M5 x 0.5 x 6.5 fixing thread

200-294

ATTO LED Indicator

The world’s smallest turn signal! Sensationally small, spectacularly bright!
Behind this extremely small and sensationally powerful Atto lies a light surface that fits four times on a $2 coin! Thanks to the miniature housing, your motorcycle can be designed as minimalistically and individually as never before.
Dimensions: length 14mm, max. Diameter 10mm, lens diameter 7.8mm
With M5 x 0.5 x 6.5 fixing thread

254-028
line-diagram-4-measurements

SCURO LED indicator

Newest light technology in black metal housing with smoke lens. Very bright LED indicator. With COB technology (Chip On Board). The semiconductor-chip wthout housing is directly adhered to the condutor board for smaller construction and better heat dissipation. A nice upgrade for every motorcycle, E-marked.
Dimensions:
A: 43 mm  |  B: 58 mm
C: 16 mm  |  D: 21 mm
Threaded bolt: M 8 x 1.25

204-001
line-diagram-4-measurements

TINY LED indicator

Modern light technology in extreme small dimension. A nice upgrade for every motorcycle. Mini indicator with plastic housing and clear lens, E-marked as rear indicator.
Dimensions:
A: 23 mm  |  B: 25 mm
C: 13 mm  |  D: 15 mm
Threaded bolt: M8

254-033
conero-line

CONERO indicator

Bright shining LED indicator with the latest COB technology and smoke lens. Premium quality made of aluminium. Black anodized, cylindrical housing with polished chamfers give this model an elegant, stylish design. E-mark for front and rear installation.

Dimensions:
A: 45 mm  |  B: 15 mm

200-205

MICRO 1000 indicator

The micro 1000 Dark has two faces: black as the night / and bright as the day. The combination of the perfect light and High Power LED Technology with IC operated Long Life Protection Guard® system and a strong glass tint offers new styling options. The micro 1000 Dark hides what’s inside –while the high performance LEDs provide a spectacularly bright indicator signal, they are hidden behind the tinted glass when not in use.
High quality metal housing M8 x 20 Thread

203-001

FLIGHT Bar End indicator

The slim and sporty design, the high-quality aluminium housing, the seamlessly inserted, smoke glass make this indicator a real premium product. Mount the silky matt anodized FLIGHT indicator direct on the bar end. Moving controls and grips is no longer necessary, this system ensures an easy and quick mounting. Suitable for handlebar inner tube diameters from 12 to 22 mm.
Dimensions:
Width A: 21.5 mm
Diameter B: 34.5 mm

203-6970

CLASSIC ZC-Line LED fork indicator

• High quality aluminium machined from one piece CNC and brushed.
• Available in black or silver anodized.
• Assembly within 10 minutes without dismantling the fork.
• Invisible screwing through the innovative STAIRS locking system.
• They stand out minimally and adapt seamlessly to any bike design.
• The bright LED light units are with E-mark and offer the highest safety standard in road traffic.

Wunderkind Indicators

WK-106342-F15 (Black)

CNC-milled aluminium LED turn signals
Razor-sharp optics thanks to narrower LEDs
E-tested for front and rear mount
Finest surface finishing by BLACKPearl anodized layer
Fixing hole should be 10 mm.

WK-106614-F15 (Black)

“Little One” Long Mini LED Indicator

CNC-milled housing.
For mounting at all plane surfaces with a minimum size of approx. 13 x 26 mm.
The housing is mounted by special sticky tape. No screwing neccessary.
Alternatively, the turn signals can also be mounted by two M3 screws.
LED indicator including E-approval.
Finest surface by house-made anodized layer BLACKPearl.
Solder connection for a fast electrical connection are included.

WK-106479-F15 (Black)

“Little One” Short Mini LED Indicator

CNC-milled housing.
For mounting at all plane surfaces with a minimum size of approx. 13 x 26 mm.
The housing is mounted by special sticky tape. No screwing neccessary.
Alternatively, the turn signals can also be mounted by two M3 screws.
LED indicator including E-approval.
Finest surface by house-made anodized layer BLACKPearl.
Solder connection for a fast electrical connection are included.

3 IN 1 REAR INDICATORS

Highsider 3 In 1 Rear Indicators

254-026

line-diagram-4-measurements
3-in-1

SPARK 3 In 1 LED Rear indicator

This Indicator is characterized by its minimal design size
Brake Light, Running Light and Indicator. black housing, smoke lens, E-marked for rear installation.
Dimensions:
A: 25 mm  |  B: 36 mm
C: 11 mm  |  D: 14,5 mm
Threaded bolt: M 8 x 1.25

254-028

line-diagram-4-measurements
3-in-1

SCURO 3 In 1 LED Rear indicator

Newest light technology in black metal housing with smoke lens. Very bright LED indicator with integrated taillight. With COB technology (Chip On Board). Brake Light, Running Light and Indicator, E-marked for rear installation.
Dimensions:
A: 43 mm  |  B: 58 mm
C: 16 mm  |  D: 21 mm
Threaded bolt: M 8 x 1.25

254-176

254-176-lights_vert
3-in-1

APOLLO 3 In 1 LED Rear indicator

Modern light technology in extreme small dimension with 2 very intense SMD in the centre. COBs (Chip On Board) complete the light source at the external ring. Brake Light, Running Light and Indicator. black housing, smoke lens, E-marked for rear installation.
Dimensions:
A diameter: 22 mm
B width: 39 mm
C depth: 21.5 mm
Stem length: 16 mm
Threaded bolt: M 8 x 1.25

254-177

254-176-lights_vert
3-in-1

APOLLO 3 In 1 LED Rear indicator

Modern light technology in extreme small dimension with 2 very intense SMD in the centre. COBs (Chip On Board) complete the light source at the external ring. Brake Light, Running Light and Indicator. chrome housing, smoke lens, E-marked for rear installation.
Dimensions:
A diameter: 22 mm
B width: 39 mm
C depth: 21.5 mm
Stem length: 16 mm
Threaded bolt: M 8 x 1.25

200-295

ATTO 3 In 1 LED Rear indicator

The world’s smallest turn signal! Sensationally small, spectacularly bright!
Behind this extremely small and sensationally powerful Atto  lies an optical and technical all-rounder: with a light surface that fits four times on a $2 coin, it disappears visually almost completely at the tail! Thanks to the miniature housing, the rear of the motorcycle can be designed as minimalistically and individually as never before. Running Light and Indicator. black housing, E-marked for rear installation.
Dimensions: length 14mm, max. Diameter 10mm, lens diameter 7.8mm
With M5 x 0.5 x 6.5 fixing thread

200-294

ATTO 3 In 1 LED Rear indicator

The world’s smallest turn signal! Sensationally small, spectacularly bright!
Behind this extremely small and sensationally powerful Atto  lies an optical and technical all-rounder: with a light surface that fits four times on a $2 coin, it disappears visually almost completely at the tail! Thanks to the miniature housing, the rear of the motorcycle can be designed as minimalistically and individually as never before.
Dimensions: length 14mm, max. Diameter 10mm, lens diameter 7.8mm
With M5 x 0.5 x 6.5 fixing thread

254-033
3-in-1
conero-line

CONERO 3 In 1 LED Rear indicator

Bright shining LED combination with the latest COB technology and smoke lens. Premium quality made of aluminium. Black anodized, cylindrical housing with polished chamfers give this model an elegant, stylish design. Brake Light, Running Light and Indicator, E-marked for rear installation.

Dimensions:
A: 45 mm  |  B: 15 mm

254-222
3-in-1
line-diagram

HATCH 3 In 1 LED Rear indicator

Modern designed indicator with integrated taillight. The newest light technology in a sturdy plastic housing in black with rubber stem. Lens comes two-part: Inner zone red – for tail and stop light – outer zone clear -for indicator light. E-marked for rear.

Dimensions:
A: 61 mm  |  B: 70 mm
C: 25,5 mm  |  D: 24 mm
Threaded bolt: M8

254-284
3-in-1
line-diagram

PEN HEAD DOUBLE 3 In 1 LED Rear indicator

LED taillight/indicator with a black rubber stem, a clear lens and waterproof connectors.  Running Light and Indicator. black housing, E-marked for rear installation.
Dimensions:
A: 47 mm  |  B: 62 mm
C: 22 mm  |  D: 21 mm
Mounting bolt: M8 x 1.25 mm

254-300
3-in-1
line-diagram

BLAZE 3 In 1 LED Rear indicator

This unit comes in a black metal housing and a black rubber stem with smoke lens and inclusive waterproof connectors. E-marked for rear installation.
Dimensions:
A: 39.5 mm  |  B: 55 mm
C: 19.5 mm  |  D: 19 mm
Mounting bolt: M8 x 1.25 mm

Wunderkind 3 In 1 Rear Indicators

WK-106611-F11 (Silver)

Taillight/brake light combination with indicators for rear guard
Suits 2018 Softail Models

3 in 1: Brake and rear light with LED turn signal function
Mountable without any additional adapter plates
Replace the massive original parts and gives your Harley wicked rear optics
Brake amd rear light with integrated turn signal in a timeless and rounded design; thus, the housing does not stick out from the fender anymore
Up-to-date LED technology (turn signal: very bright SMD, brake and rear light consist of COBs)
E-approval, thus, no duty to register
High-end CNC milled aluminium
Finest surface by BLACKPearl anodized aluminium

WK-106611-F15 (Black)

Taillight/brake light combination with indicators for rear guard
Suits 2018 Softail Models

3 in 1: Brake and rear light with LED turn signal function
Mountable without any additional adapter plates
Replace the massive original parts and gives your Harley wicked rear optics
Brake amd rear light with integrated turn signal in a timeless and rounded design; thus, the housing does not stick out from the fender anymore
Up-to-date LED technology (turn signal: very bright SMD, brake and rear light consist of COBs)
E-approval, thus, no duty to register
High-end CNC milled aluminium
Finest surface by BLACKPearl anodized aluminium

WK-106431-F15 (Black)

Taillight/brake light combination with indicators for rear guard
Suits 2014-2017 Softail Breakout FXBR

3 in 1: Brake and rear light with LED turn signal function
Mountable without any additional adapter plates
Replace the massive original parts and gives your Harley wicked rear optics
Brake amd rear light with integrated turn signal in a timeless and rounded design; thus, the housing does not stick out from the fender anymore
Up-to-date LED technology (turn signal: very bright SMD, brake and rear light consist of COBs)
E-approval, thus, no duty to register
High-end CNC milled aluminium
Finest surface by BLACKPearl anodized aluminium

WK-106715-F15 (Black)

Taillight/brake light combination with indicators for rear guard
Suits up to 2004 Sportster Models

3 in 1: Brake and rear light with LED turn signal function
Mountable without any additional adapter plates
Replace the massive original parts and gives your Harley wicked rear optics
Brake amd rear light with integrated turn signal in a timeless and rounded design; thus, the housing does not stick out from the fender anymore
Up-to-date LED technology (turn signal: very bright SMD, brake and rear light consist of COBs)
E-approval, thus, no duty to register
High-end CNC milled aluminium
Finest surface by BLACKPearl anodized aluminium

ELIMINATORS

RC Components Indicator Eliminators

We believe your motorcycle isn’t simply a means of transportation, but rather a representation of your very identity. That’s why we have introduced the Majestic Series line of bolt on accessories to provide both function and style to your ride. Each item in the Majestic Series lineup is available in your choice of chrome or a black Eclipse finish. So when you want to show off your style, choose the Majestic Series of bolt on accessories and turn your ride into a personal statement!

RC-DI-02C Chrome

Chrome Turn Signal Eliminators

RC-TSE-02E Eclipse

Eclipse Turn Signal Eliminators

MOUNTING HARDWARE

Thunderbike Mounting Hardware

REAR TURN SIGNAL MOUNT KIT

Suits VRSC / V-Rod Models

  • 8mm
  • Sold in pairs
  • Polished
  • Stainless steel

REAR TURN SIGNAL MOUNT KIT

Suits VRSC / V-Rod Models

  • 8mm
  • Sold in pairs
  • Black
  • Stainless steel

Highsider Mounting Hardware

Conical Spacer Sleeve

These tapered spacer sleeves are made of aluminium for almost all indicators with a M8 threaded bolt from HIGHSIDER . With a slot for easy passage of cables. Can be used as turn signal extension either, or, if the threaded bolt protruding too long (for example, the fastening to the lamp holder), and abuts against the lamp housing.

Dimensions:
Diameter (tapered) 15.5 mm up to 14 mm
Length: 10 mm  |  Bore: 8 mm.

Conical Spacer Sleeve

These tapered spacer sleeves are made of aluminium for almost all indicators with a M8 threaded bolt from HIGHSIDER . With a slot for easy passage of cables. Can be used as turn signal extension either, or, if the threaded bolt protruding too long (for example, the fastening to the lamp holder), and abuts against the lamp housing.

Dimensions:
Diameter (tapered) 15.5 mm up to 14 mm
Length: 10 mm  |  Bore: 8 mm.

WIRING / LENSES / BULBS

Thunderbike Wiring

2050-0251

LED Signal Converter
2 Wire – Three Wire

For Dual Function Amber
* Running Lights and Marker lights

Wunderkind Wiring

207-033
207-033_diag

CAN-BUS resistor CBW1

HIGHSIDER CAN-BUS resistor CBW1 fits most vehicles that have a CAN-BUS system.

The CBW1 resistor provides a required electrical load for your vehicle, which, if the dip switches are set correctly, will result in no flashing of the accessory flashers in the cockpit. In addition, a reliability is given. This means: If the accessory indicators fail due to an electronic fault, an error message is immediately displayed in the cockpit. Up to 2 channels can be operated, such as turn signals at the rear left and turn signals at the rear right. If 2 pairs of indicators need to be changed,also 2 CBW1 needed to be used. Which requirements should be met in order to use the CBW1 on the motorbike:
Either: The motorbike was originally produced with LED indicators.
Or: The motorbike has a CAN-BUS System
If these requirements are not met, the CBW1 unit will not function

The following resistance values can be set on the CBW1:
150 ohms  |  170 ohms  |  240 ohms  |  300 ohms
400 ohms  |  600 ohms  |  1200 ohms
Dimensions:
Height = 11mm
Width = 31mm (without straps)
Width = 46mm (with tabs)
Length = 40mm
Cable length = 200mm with pins

KPR Lenses

Ghost Lenses

60mm POP Chrome Indicator lenses
Use with amber bulb #2060-0236

KPR Bulbs

REPLACEMENT BULBS

All bulbs are packaged in blister packs and sold in packs of two unless otherwise noted